PCB 2060-001267-001 for WD 3.5" SATA HDD
PCB 2060-001267-001 for WD 3.5" SATA HDD - Image 2
PCB 2060-001267-001 for WD 3.5" SATA HDD - Image 3

PCB 2060-001267-001 for WD 3.5″ SATA HDD

(1 customer review)

$36.00

Used to unscrew PCB from HDD
Product total
Options total
Grand total
SKU: 2060-001267-001
Category:

Description

Replacement PCB circuit (controller) board 2060-001267-001 for WD 3.5″ SATA hard drive.

PCB Number: 2060-001267-001
Main Controller IC: WD70C26-GP
HDD Motor Combo IC: L6283 1.3

Before purchasing please read:

  • The listing is for a hard drive circuit board (PCB / controller board / logic board) ONLY. No hard drive is included.
  • All hard drive PCBs are tested before shipment and are guaranteed to be 100% working properly.
  • This hard drive PCB is intended for use in data recovery or hard drive repair purposes, and there is no refund/exchange policy.
  • It’s important to ensure that this PCB is compatible by reviewing the How to swap a HDD PCB?
  • Most hard drive PCBs contain unique information in the ROM “memory” chip (BIOS chip). The BIOS chip or its data must be transferred onto the new circuit board, a local computer professional should be able to handle such a task.
  • Hard drive failures are NOT always caused by PCB failure. We cannot guarantee that your drive will be repaired by replacing the PCB.

Additional information

Weight80 g
Brand

Western Digital

Hard Disk Form Factor

3.5 inch

Connectivity Technology

Versions

REV A, REV B, REV P0, REV P1, REV P2 are compatible

1 review for PCB 2060-001267-001 for WD 3.5″ SATA HDD

  1. William Babey –

    Came Without The Bios Chip Installed, So It Is Very Clear Which Chip Is Required To Swap Over For This To Work. Seems To Be In Good Condition (All Components And Solder Joints Look Fine), Havent Had Time To Test The Board Yet.

Add a review

Related Products